Tri-Mix Concrete Ad-Mix 600 Specification Sheet



IMAGE 2000

Industrial Coatings
Product Specification Sheet

Tri-Mix Concrete Ad-Mix 600

Description: A modified, styrene-butadiene copolymer, concrete additive designed to provide high performance concrete,
grout and/ or mortar mixes.

Usage: Excellent substrate for other finishes. Builds up badly eroded concrete. Resurface slabs, thick or thin sections.
Does not retard the natural hydration of cement, unlike most other concrete ad-mixtures.


  • Establishing slopes to a feather edge.

  • May be mixed with a variety of special fillers or with standard concrete for heavy duty structural pours.

  • Machinery setting grout

  • Waterproofing slurry Horizontal or vertical

  • Patch repairs slabs, walls, columns, corners, etc.

  • Bond new concrete to old concrete, wood or metal

  • Repair Point and tuck of masonry.

  • Tile grout and mortar bed, base and adhesive.

  • Smooth or non-skid deck topping. May be mixed with fine or coarser aggregates.

Preparation Surface to be coated must be cured, firm, dry and clean; free of dust, oil, grease, and wax.
Loose paint, chalk, rust or scale must be removed. Any contamination will adversely affect the
performance of the coating.

Application: Trowel down. Product Coverage . Apply.


Pot life

Shelf life

Clean up

Dry time

Open to traffic -

Caution: Keep away from children. Do not take internally. If taken, contact physician. In the event of eye
contact, flush eyes with water for 15 minutes and seek medical attention.


                                    [HOME]  [EMAIL] [CONTACT] [ABOUT US] [COMMENTS
                                            [REFERENCES] [BEFORE & AFTER] [MORE PICTURES] [PRODUCT LIST]

This site was last updatedTuesday May 08, 2018 09:30 PM -0700
& IMAGE2000 1998-20