 Industrial Coatings
Product Specification Sheet
Coriom
NO. 9200 Exterior Acrylic House paint

Description:
A premium quality
100% Acrylic exterior paint which provide a tough flexible and durable
finish on exterior surfaces. It has excellent resistance to ultraviolet
rays as well as to chemical fumes. This product is fast drying and dries
to a medium sheen.
Usage: This product can be
applied to most exterior surfaces including wood siding and trim, masonry,
stucco, concrete, unglazed brick, building block and metal. Metal surfaces
should be properly primed (Rust-trapper) prior to the application of
Coriom 9200. Previously painted surfaces in good condition do not require
any special primers. This product may be utilized on interior surfaces as
well as exterior surfaces. NOT intended for decks, steps, or walkways or
other foot or vehicular traffic areas.
Preparation:
Apply in good
weather when air and surface temperature are above 50 F. Surface to be
painted should be clean, cured, and dry. All loose or peeling paint,
grease, oil, dirt or other foreign matter should be removed prior to
painting. Etch glossy or glazed surfaces.
Application:
Stir contents
thoroughly. Paint during dry weather.
Coverage:
Approximately
300-400 sq. ft. per gallon. Dry-mil thickness: 1.4 mils
Characteristics:
Pot life –
2 hours at 70 degrees F.
Shelf life –
I year.
Clean up –
Soap and water
Dry time –
30 to 40 minutes
at 77 F., 50% humidity.
Weight per gallon 10.7 pounds
Percent solids by weight 50.6% by volume 36.5%
Flash point – none – over 200 F
VOC g/l
Viscosity: 105 to 110 KU
Titanium Dioxide 58%
Caution:
Keep
away from children. Do not take internally. If taken, contact physician.
When spraying a protective mask should be worn to avoid inhaling. In the
event of eye contact, flush eyes with water for 15 minutes and seek
medical attention.
KEEP FROM FREEZING.
|