Industrial Coatings

Product Specification Sheet 
Flow-Ease Fisheye Remover


Flow-Ease Fisheye Remover Specification Sheet

Description: A single component, additive for polyurethane's, epoxies, acrylics, lacquers or for any coating where unwanted bubbling or fish eyes occur. Flow-Ease, the best fish eye remover available.

Usage: Primary use as a smoothing agent for all paints and coatings, except latex.

Mixing Instructions:
A: Mix ratio by volume 1/2 to 1 ounce per gallon of product.
 B: Stir for 3 minutes with drill blade mixer at 500 rpm.
C. Let mixed product sit (dwell time) for 15 to 20 minutes before use.

Application: Products can be applied by your usual method: brush, roller or spraying.  Does not affect amount of coverage.

Characteristics: Pot life Shelf life Flow-Ease does not affect pot life or shelf life of product.

Dry Time Unaffected by Flow-Ease

Cure Time Unaffected by Flow-Ease

Reducer - Not applicable

Caution: Keep away from children. Do not take internally. If taken, contact physician. When spraying a protective mask should be worn to avoid inhaling. In the event of eye contact, flush eyes with water for 15 minutes and seek medical attention.

KEEP PRODUCT FROM FREEZING

                                    [HOME]  [EMAIL] [CONTACT] [ABOUT US] [COMMENTS
                                            [REFERENCES] [BEFORE & AFTER] [MORE PICTURES] [PRODUCT LIST]
                                            [PRICE LIST] [DISTRIBUTOR APPLICATION] [ADVANCE FLOOR TROUBLESHOOTING]

This site was last updatedTuesday May 08, 2018 09:30 PM -0700
& IMAGE2000 1998-20
18