Image 2000

Industrial Coatings

Product Specification Sheet

           Epoxy 1200

Description:
Two component, excellent gloss, extremely chemical resistant, UV resistant,  very tough and durable.

Usage:  Concrete floors and walls, top coat for steel; structures, tanks, "computer clean" rooms,    medical sterile rooms, food and biological applications.  Used in warehouses, machine shops, automobile service departments, bridges, and for anti-graffiti applications. 

Mixing   
A: Mix ratio by two  parts A to one part B.
Instructions: Use separate container for mixing.
   1. Pre-mix part A and  pour into mixing container.
   2. Add part  B.
   3. Mix for four  minutes with drill blade mixer at 500 rpm.
   4. Add thinner as required, up to 10% of volume and mix for 1   minute.
   
Application: Product can be applied by brush,  roller or sprayed (with supplied air).  Coverage 275' to  300' per gal.

Characteristics:
Pot life - 1 hours at 70 degrees F.
Shelf life - I year.
Clean up - RT-130 ImageSol thinner.
Dry Time - tact free 12 to 14 hours at 70 degrees F.
Cure Time - 24-48 hours.
Reducer RT-225 or RT-130.

Caution: Keep away from children. Do not take internally. If taken, contact physician. When spraying a protective mask should be worn to avoid inhaling. In the event of eye contact, flush eyes with water for 15 minutes and seek medical attention.  

KEEP FROM FREEZING.

[HOME]  [EMAIL] [CONTACT] [ABOUT US] [COMMENTS
[REFERENCES] [BEFORE & AFTER] [MORE PICTURES] [PRODUCT LIST]
[PRICE LIST] [DISTRIBUTOR APPLICATION] [ADVANCE FLOOR TROUBLESHOOTING] [PRI]

This site was last updated Tuesday October 14, 2003 03:21 PM -0700
ŠIMAGE2000 1998, 1999, 2000, 2001, 2002, 2003, 2004