Image 2000

Industrial Coatings

Product Specification Sheet

Epoxy 1100

Description: Two component urethane modified polyamide epoxy. Excellent coating for walls, floors and equipment. Excellent adhesion and high coefficient of expansion. High chemical and UV resistance. Medium build coating.

Usage: For applications over wood, concrete block or metal where a durable tile like finish is required. Ideal for clean rooms, restaurants and food process areas.

Mixing A: Mix ratio by one parts A to one part B.

Instructions: B: Use separate container for mixing.

1. Pre-mix part A and pour into mixing container.

2. Add part B.

3. Mix for four minutes with drill blade mixer at 500 rpm.

4. Let stand (dwell time) for 15-20 minutes before use.

Application: Product can be applied by brush, roller or sprayed. Coverage 275’ to 300’ per gal.

Characteristics:
Pot life – 3 hours at 70 degrees F.
Shelf life – I year.
Clean up –RT-125 or RT-130 ImageSol thinner.
Dry Time – tact free 12 to 14 hours at 70 degrees F.
Cure Time – 5 to 8 hours at 70 degrees.
Reducer RT-125 or RT-130.

Caution: Keep away from children. Do not take internally. If taken, contact physician. When spraying a protective mask should be worn to avoid inhaling. In the event of eye contact, flush eyes with water for 15 minutes and seek medical attention.  

KEEP FROM FREEZING. Two component urethane modified polyamide epoxy. Excellent coating for walls, floors and equipment. Excellent adhesion and high coefficient of expansion. High chemical and UV resistance. Medium build coating.

Usage: For applications over wood, concrete block or metal where a durable tile like finish is required. Ideal for clean rooms, restaurants and food process areas.

Mixing A: Mix ratio by three parts A to one part B.

Instructions: B: Use separate container for mixing.

1. Pre-mix part A and pour into mixing container.

2. Add part B.

3. Mix for four minutes with drill blade mixer at 500 rpm.

4. Let stand (dwell time) for 15-20 minutes before use.

Application: Product can be applied by brush, roller or sprayed. Coverage 275’ to 300’ per gal.

Characteristics:
Pot life – 3 hours at 70 degrees F.
Shelf life – I year.
Clean up –RT-125 or RT-130 ImageSol thinner.
Dry Time – tact free 12 to 14 hours at 70 degrees F.
Cure Time – 5 to 8 hours at 70 degrees.
Reducer RT-125 or RT-130.

Caution: Keep away from children. Do not take internally. If taken, contact physician. When spraying a protective mask should be worn to avoid inhaling. In the event of eye contact, flush eyes with water for 15 minutes and seek medical attention.  

KEEP FROM FREEZING. Two component urethane modified polyamide epoxy. Excellent coating for walls, floors and equipment. Excellent adhesion and high coefficient of expansion. High chemical and UV resistance. Medium build coating.

Usage: For applications over wood, concrete block or metal where a durable tile like finish is required. Ideal for clean rooms, restaurants and food process areas.

Mixing A: Mix ratio by three parts A to one part B.

Instructions: B: Use separate container for mixing.

1. Pre-mix part A and pour into mixing container.

2. Add part B.

3. Mix for four minutes with drill blade mixer at 500 rpm.

4. Let stand (dwell time) for 15-20 minutes before use.

Application: Product can be applied by brush, roller or sprayed. Coverage 275’ to 300’ per gal.

Characteristics:
Pot life – 3 hours at 70 degrees F.
Shelf life – I year.
Clean up –RT-125 or RT-130 ImageSol thinner.
Dry Time – tact free 12 to 14 hours at 70 degrees F.
Cure Time – 5 to 8 hours at 70 degrees.
Reducer RT-125 or RT-130.

Caution: Keep away from children. Do not take internally. If taken, contact physician. When spraying a protective mask should be worn to avoid inhaling. In the event of eye contact, flush eyes with water for 15 minutes and seek medical attention.  

KEEP FROM FREEZING. Two component urethane modified polyamide epoxy. Excellent coating for walls, floors and equipment. Excellent adhesion and high coefficient of expansion. High chemical and UV resistance. Medium build coating.

Usage: For applications over wood, concrete block or metal where a durable tile like finish is required. Ideal for clean rooms, restaurants and food process areas.

Mixing A: Mix ratio by three parts A to one part B.

Instructions: B: Use separate container for mixing.

1. Pre-mix part A and pour into mixing container.

2. Add part B.

3. Mix for four minutes with drill blade mixer at 500 rpm.

4. Let stand (dwell time) for 15-20 minutes before use.

Application: Product can be applied by brush, roller or sprayed. Coverage 275’ to 300’ per gal.

Characteristics:
Pot life – 3 hours at 70 degrees F.
Shelf life – I year.
Clean up –RT-125 or RT-130 ImageSol thinner.
Dry Time – tact free 12 to 14 hours at 70 degrees F.
Cure Time – 5 to 8 hours at 70 degrees.
Reducer RT-125 or RT-130.

Caution: Keep away from children. Do not take internally. If taken, contact physician. When spraying a protective mask should be worn to avoid inhaling. In the event of eye contact, flush eyes with water for 15 minutes and seek medical attention.  

KEEP FROM FREEZING.

[HOME]  [EMAIL] [CONTACT] [ABOUT US] [COMMENTS
[REFERENCES] [BEFORE & AFTER] [MORE PICTURES] [PRODUCT LIST]
[PRICE LIST] [DISTRIBUTOR APPLICATION] [ADVANCE FLOOR TROUBLESHOOTING] [PRI]

This site was last updated Tuesday October 14, 2003 03:22 PM -0700
ŠIMAGE2000 1998, 1999, 2000, 2001, 2002, 2003, 2004